Double Din Radio Provision - Metra 99-7610 Instrucciones De Instalación

1. Mount the factory brackets (removed
from factory radio during disassembly)
to the sides of the aftermarket radio
using screws supplied with the radio.
(Figure A)
2. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
3. Place the double DIN trim plate on the
front of the radio. (Figure B)
4. Reassemble the dash in reverse order
of disassembly.
Kit Assembly 99-7610

Double DIN radio provision

(Figure A) (Figure B)
6