Changing Indicator Settings With Data Link; Span Calibration - Tru-Test S3 Manual Del Usuario

Changing indicator settings with
4
Data Link
You may want to change the indicator settings depending on your weighing scenario.
This is a quick and simple process using Data Link on your mobile device or
Windows* computer.
Selecting non-Tru-Test load bars
The S3 indicator is pre-calibrated to work with leading non-Tru-Test load bars.
1. Plug your load bars into the indicator.
2. Connect to the indicator using Data Link on your mobile device or Windows*
computer.
3. Select
4. Select your load bars from the list that appears.
If your load bars are not on the list, you need to perform a span calibration.

Span calibration

If your load bars are not available for selection on Data Link, you will need to perform
a span calibration to ensure that your animals are weighed correctly.
1. Connect to the indicator using Data Link on your mobile device or Windows*
computer.
2. Select
3. Follow the steps to complete the span calibration.
6
to open Settings, and go to the Load bar type menu.
to open Settings, and choose Span calibration.