Maintenance And Repair; Ec Declaration Of Conformity - Denios LD-SK Manual De Instrucciones

Ocultar thumbs Ver también para LD-SK:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

8. Maintenance and repair

(see also BGV D8)
To guarantee safe working with the product the following checks are necessary:
-
Regular check for ease of movement of the moving parts and if necessary lubrication with
commercially-available grease.
-
Regular visual inspections and operational checks at intervals of max. one year by a technical specialist.
A visual and functional check should include fissures, deformities, cracks, damage, wear, corrosion
-
damage and functional faults of the drum lifter and also that it is suitable for the types of drum
transported.
A check report log is to be compiled and kept by the operator as proof that the checks have been carried
-
out.
-
Additional tests should be carried out by a qualified technician in the event of damage or particular
incidents that could influence carrying capacity and after any repairs.
Before visual and functional checks, cleaning of the drum lifter may be necessary. This particularly
-
applies if the forks have been contaminated during use by materials such as dyes and salts.
Drum lifter with hydraulics:
Check the hydraulic system for leaking oil and if necessary tighten the screws or change the seals. If filling
with oil is needed ensure hydraulic oil meeting ISO VG 46 is used.
The lifting chain should be checked along its entire length, even where parts are hidden.
The drum lifter should be taken out of service if any of the following defects are noted on the chain:
a) Noticeable elongation of the chain or an individual link
b) Breakage of a chain link
c) Cracks in a chain link
d) Deformation of a chain link
e) Wear on the bolt safety devices
If there is visible deformation or damage, the drum lifter must not be used.

9. EC Declaration of Conformity

We, DENIOS AG, Dehmer Straße 58-66, 32549 Bad Oeynhausen, hereby declare that our product
conforms to the following regulations.
Type:
EC Directives
Machinery Directive 2006/42/EC
Harmonised standards applied
EN 349
EN ISO 3691-5
EN ISO 12100
EN ISO 13857
Authorised documentation representative
Dr. Wagner
- Manager-
Fasslifter LD-SK
201867
EC Declaration of Conformity
Drum lifter LD-SK
Seite 8 von 15 Seiten
DENIOS AG, 2013-11-29
Mr. B. Boucke
- Management Board-
Ausgabe 11/2013

Publicidad

Tabla de contenido
loading

Tabla de contenido