Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
RADIO MODULE 801719-6
To operate the control board via radio remote control, a radio
module must first be installed.
TEACHING / DELETING THE HAND-HELD TRANSMITTERS
See description radio adapter.
RPM SENSOR
A rotational speed sensor (RPM sensor) can be optionally installed.
The sensor enables the automatic reversing of the gate if an
obstacle is detected. RPM sensor: Connector JP6 on the control
board
If a battery is being used, the menu P19 must be set to YES.
ELECTRIC LOCK (OPTIONAL) Model: 600022 (24V)
The operation of an electrical lock via the contact COM/NO
(light output) is possible. If required, please contact our service
department.
Do not use any fixed copper lines. Do not lay any 230 volt
cables in parallel and do not lay any 2 cables in the same
cable trunking.
1
17 18
1
2
3
4
COM NO
5
6
7
8
Publicidad
Tabla de contenido
