1. Introduction
1.1 The manual
The information contained in this manual refer to Safety, electric and mechanical Specifications and
Connection.
As for the other parts (*) please refer to the enclosed drive manual.
(*) Chapters:
- Serial interface (AVyL),
- Drive keypad operation ,
- Commissioning,
- Parameters,
- Troubleshooting.
1.2 Lift Drive System
Lift Drive System is the Gefran-Siei integrated system dedicated to the lift industry and in general
to the lifting applications.
The system consists of the following wired components (see the table):
•
one inverter series AGyL or AVyL
•
one input EMI filter
•
one inductance on the DC link
•
output contactors (two series-connected contactors type LDS)
•
keypad (option)
•
terminal board on a DIN guide
Version with AVyL inverter:
Flux Vector Drive specific for the speed regulation of asynchronous and brushless motors in lifts
applied for the modernisation of existing systems or in brand new systems.
One single drive can control asynchronous and synchronous motors in applications with or without
a reducer.
A flexible programming structure and a specific application menu can be easily managed through an al-
phanumeric keypad or PC configurator allowing a fast commissioning of the inverter. Applications:
•
New installation and Retrofitting
•
Speed range up to 5m/s
•
Geared and gearless
Version with AGyL inverter:
Sensorless Drive dedicated to the speed regulation of asynchronous motors in lifts applied for the
modernisation of existing systems or in brand new systems.
The AGyL inverter guarantees excellent performances with any kind of asynchronous motor in ap-
plications with or without a reducer.
A simple programming structure can be easily managed through an alphanumeric keypad or PC
configurator allowing a fast commissioning of the inverter. Applications:
•
New installation and Retrofitting
•
Speed range up to 1m/s with open loop and up to 1.5 m/s with closed loop
•
Geared and gearless
• Lift Drive System