Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting Clearance
The device must be mounted in such a way that the free flow of air is ensured.
The clearance to the device must be at least 150 mm (6 inches).
A space of at least 50 mm (2 inches) must be ensured at the front and sides.
Devices that generate a large amount of heat must not be mounted in the direct vicinity of the fre-
quency inverter.
Fastening screws should be re-tightened after a few days of operation.
Figure 4.3: Mounting clearance
150 mm (
6"
)
50 mm (
2" )
150 mm (
6"
)
50 mm (
2" )
50 mm (
2" )
Lift Drive System • 4
Publicidad
Capítulos
Tabla de contenido
