Dash Disassembly - Metra 95-7807 Instrucciones De Instalación

1.
Unclip and remove the trim panel from
above the glove box located on the right side
of the factory radio. (Figure A)
2. Unclip and remove the trim panel from
above the glove box located on the left side
of the factory radio. (Figure B)
2

DASH DISASSEMBLY

(Figure A)
(Figure B)
3.
Remove the (2) Phillips screws from the left
and right side of the factory radio. (Figure C)
4.
Unsnap and remove the factory air vents
located above the radio. (Figure D)
C ontinue on next page
(Figure C)
(Figure D)
|
386.257.1187 MetraOnline.com