Matrix T3xe Manual Del Usuario página 13

MAINTENANCE
1. Any and all part removal or replacement must be performed by a qualified service technician.
2. DO NOT use any equipment that is damaged and or has worn or broken parts.
Use only replacement parts supplied by your country's local MATRIX dealer.
3. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for
any reason. They contain important information. If unreadable or
missing, contact your MATRIX dealer for a replacement.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to
smooth operating equipment as well as keeping your liability to a
minimum. Equipment needs to be inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing maintenance
or repair of any kind is qualified to do so. MATRIX dealers will provide service
and maintenance training at our corporate facility upon request.
WARNING
To remove power from the Treadmill, the power cord must be disconnected from the wall outlet.
RECOMMENDED CLEANING TIPS
Preventative maintenance and daily cleaning will prolong the life and look of your
equipment.
A Use a soft, clean cotton cloth. DO NOT use paper towels to clean surfaces on the
treadmill. Paper towels are abrasive and can damage surfaces.
B Use a mild soap and damp cloth. DO NOT use ammonia based cleaner or alcohol.
This will cause discoloring of the aluminum and plastics it comes into contact with.
C Do not pour water or cleaning solutions on any surface. This could cause
electrocution.
D Wipe the console, heart rate grip, handles and side rails after each use.
E Brush away any wax deposits from the deck and belt area. This is a common
occurrence until the wax is worked into the belt material.
F Be sure to remove any obstructions from the path of the elevation wheels including
power cords.
G For cleaning touch screen displays, use distilled water in an atomizer spray bottle.
Spray distilled water onto soft, clean, dry cloth and wipe display until clean and dry.
For very dirty displays, adding vinegar is recommended.
CAUTION: Be sure to have proper assistance to install and move the unit in order to
avoid injury or damage to the treadmill.
MAINTENANCE SCHEDULE
ACTION
Unplug the unit. Clean entire machine using water and
a mild soap or other Matrix approved solution (cleaning
agents should be alcohol and ammonia free).
Inspect the power cord. If the power cord is damaged,
contact Customer Tech Support.
Make sure the power cord is not underneath the unit or in
any other area where it can become pinched or cut during
storage or use.
Unplug the treadmill and remove the motor cover. Check for
debris and clean with a dry cloth or small vacuum nozzle.
WARNING: Do not plug the treadmill in until the motor cover
has been reinstalled.
For touch screen consoles, enter service mode and select
'test'. Select 'touch calibration' and then select 'start'.
Follow the on-screen prompts and touch the screen where
indicated.
T3xh & T3xm only:
Clean IR sensors (located on console masts) with a cotton
swab and rubbing alcohol.
DECK AND BELT REPLACEMENT
One of the most common wear and tear items on a treadmill is the deck and
belt combination. If these two items are not properly maintained they can cause
damage to other components. This product has been provided with the most
advanced maintenance free lubricating system on the market.
WARNING: Do not run the treadmill while cleaning the belt and deck. This can
cause serious injury and can damage the machine.
Maintain the belt and deck by wiping the sides of the belt and deck with a clean
cloth. The user can also wipe under the belt 2 inches (~51mm) on both sides
removing any dust or debris.
The deck can be flipped and reinstalled or replaced by an authorized service
technician. Please contact Matrix Fitness Systems for more information.
FREQUENCY
DAILY
DAILY
DAILY
MONTHLY
QUARTERLY
QUARTERLY
13