Medel ELITE Instrucciones De Uso página 14

EN
Er 4
Er 5
Er 6
Er 7
Er 8
Er A
5.1 Other possible malfunctions:
Problem
Only the symbol
" " flashes
The blood pressure
values displayed are
abnormally high or
low.
The (I.H.B.) symbol
" " is displayed,
but my heart beat rate
should be normal.
14
Pneumatic system leakage or
cuff is too loose during inflati
Cuff pressure above
300mmHg
More than 3 minutes with cuff
pressure above 15 mmHg
Problem in internal memory
device
Device parameter checking
error
Pressure sensor parameter
error
Possible cause(s)
Batteries are drained.
The cuff is not wrapped
correctly or not at the
level of the heart.
Too much stress is ap-
plied on your shoulder
or arm.
You move your arm
or arm muscles during
measurement.
You move your arm
or arm muscles during
measurement.
Apply the cuff correctly and try
again
Measure again after five minutes.
If the monitor is still abnormal,
please contact the local distributor
or the factory.
Recommended Action
Replace all batteries
with new ones.
Wrap the cuff correctly
and rise your hand
so that the cuff is at
the same level of your
heart.
Relax yourself and make
measurement.
Remain still and do
not move /contract the
muscles during measure-
ment.
Remain still and do
not move /contract the
muscles during measure-
ment.