Luggage Rack - Wayscral Everyway E-350 Manual De Instrucciones

To adjust the hardness, you can turn the knobs on either side
of the fork to reach the hardness required.
WARNING: The suspension fork and shock
absorbers must never be removed by the user.
This operation must be performed by a
qualified mechanic.
h) Method for determining the correct
adjustment of the quick release
mechanisms (wheels and seat post)
The wheels and seat post have an integrated quick release
system.
Warning: The quick release systems are
designed to be operated by hand. Never use
tools to block or unblock the mechanism to
avoid damaging it. To adjust the clamping
force, you must use the adjustment nut located
opposite the lever and not turn the quick-
release lever.
To adjust, block or unblock the quick release mechanisms:
The lever must show some resistance to opening, for example,
it must not be possible to open the locking mechanism with
one finger.
In the wheels, the system should mark the fork dropouts when
closed in the locked position.
Make sure you have properly tightened the mechanism before
using the bicycle. If the lever can be operated with minimal
manual pressure, it means that it is not sufficiently tightened.
The adjustment, nut must therefore be tightened without the
use of tools.
Adjustment nut
Each time an adjustment is carried out, check that the front
wheel is correctly centred in relation to the fork and that the
rear wheel is centred between the two rear chainstays.
IV. Accessories
a) Lighting
You are provided with a lighting system that is composed of
two lights (a white light attached to the front and a red light
attached to the rear) and two orange reflectors positioned
between the wheel spokes.
The lighting system is a safety mechanism for your bicycle and
as such it must be present on your bike.
Make sure that your lighting system works properly before
riding.
Turn the front and rear lights on/off using the display controls.
b) Bell
A bell is fitted to your handlebars. It has a range of 50 m.
The bell is a safety device for your bicycle and as such must be
present on your handlebars.
c) Kickstand
Before each use, check that your kickstand (optional) is folded
up. The kickstand has a locking system which is deactivated
with a press of the foot.
d) Luggage rack
It attaches to the top of your rear wheel with frame screws.
These fixing elements must be tightened and checked regularly
at the torque indicated in the specifications table.
The maximum permissible load indicated in the specifications
table must not be exceeded.
21/90
Open Closed