Use
EN Before you start
WARNING: Read the instructions before using the appliance.
For CLPYRO65UK (EAN 5059340127484):
Switch on the power to the appliance at the mains outlet. The appliance will beep once and "0:00" will be
displayed. It is important to set the clock before proceeding to ensure all functions operate correctly. After
ten minutes of inactivity, the appliance will automatically switch off; operate any control to turn it back on.
For CLPYRO65EU (EAN 5059340127446):
Switch on the power to the appliance at the mains consumer unit. The appliance will beep once and
"0:00" will be displayed. It is important to set the clock before proceeding to ensure all functions operate
correctly. After ten minutes of inactivity, the appliance will automatically switch off; operate any control to
turn it back on.
Clock setting
1. Press the Time button "
2. Rotate the right control knob "< >" to set the hours from 0-23.
3. Press the Time button "
4. Rotate the right control knob "< >" to set the minutes from 0-59.
5. Press the Time button"
Note: After power on, if the clock is not set, the time will become "0:00".
Using your oven
Before first use
• Remove all stickers, surface protection foils and packing materials.
• Remove all accessories and the side racks from the cavity.
• Clean the appliance cavity and all accessories as described in Care and maintenance.
• Turn the oven on, choose Convection mode and set the temperature to 250 °C. Close the door and
cook for 90 minutes to burn off any remaining manufacturing residues. (See the section "Cooking Mode"
below.)
IMPORTANT: Keep the kitchen well ventilated during this first use to help disperse
the odours produced. Keep kitchen doors closed and ensure children and pets are
" and the hours digit will flash.
" again and the minutes digit will now flash.
" again to confirm the clock setting.
not present.
21