Appendix; Display Information - Testboy TV 600 Instrucciones De Empleo

Appendix

Appendix

Display information

Info Reason
204 Calculation error
205 Maximum range ex-
ceeded
252 Temperature is too
high
253 Temperature is too
low
255 Received signal is
too weak
256 Received signal is
too strong
257 Measurement error,
too much back-
ground light
258 Initialisation error
Hardware error
44
Remedy
Repeat the operation
Use the device inside the
maximum range
Allow the device to cool
down
Warm the device up
Use a target board or look
for a more reflective surface
The target surface is too re-
flective (use a target board)
Darken the target (measure
during different lighting con-
ditions)
Restart the device
If this message still appears
after the device has been
turned on and off multiple
times, please contact your
dealer.
TV 600