Delivery - FINO DOSIL 14290 Información Sobre El Uso

Problem Cause
Proportion of the The volume of one of the pump
components clearly chambers has considerably in-creased
deviates from a 1:1 due to abrasion – caused by quartz
mixing ratio. particles in the silicone.
Unit does not produce The tooth wheels in the pump are
in a mixing ratio of 1:1. worn unequally.
10
Aid
Bring the filling height of the reservoirs
(bottles/canisters) onto the same level
and extract about 250 ml (corresponds to
about 2-3 duplications). If the extraction
volume after this test noticeably deviates
in one of the components, the output
can be adjusted to the required 1:1
dosage with the help of the setting
screws (9/10).
Important note: Exclusively change the
output of the component that shows a
higher volume output (lower filling level).
Release the cover of the setting screw
(9/10) that needs adjustment and care-
fully insert a slotted screwdriver into the
opening until it noticeably snaps into the
slot of the setting screw.
The volume output of this component
can be reduced through anti-clockwise
rotation.
Change the volume output only gradual-
ly. A ½ turn will already effect a volume
reduction of about 4 %. Repeat this
process, if necessary, after you have
checked the mixing ratio.
After adjustment re-lock the setting
screw with its cover.
The unit has to be overhauled by
qualified personnel.
Cleaning the mixing head Exchange of the micro-fuse
Bleeding of the feeding system
12. Delivery includes
FINODOSIL Dosing and Mixing Unit complete with 2 bottle adapters and 5 mixing tips, pink.
13. Accessories
FINO Mixing Tips, pink 100 pieces
FINODOSIL Support Rack, for can
FINODOSIL Connecting Hoses, for 6 kg
FINODOSIL Silicone Container, 1,7 l
14. Guarantee
Our technical recommendations of application are based on our own experiences and tests and should
only be regarded as guidelines. It rests with the skills and experience of the user to verify that the products
supplied by us are suitable for the intended procedures. Our products are undergoing a continuous further
development. We reserve the right of changes in construction and composition. It is understood that we
guarantee the impeccable quality of our products.
15. Disposal in accordance with EU guideline 2012/19/EU
This equipment may not be disposed in domestic waste!
Please contact the manufacturer or your dealer!
Registration Number WEEE-Reg.-No. DE 75542610
14291
1 piece 14292
2 pieces 14293
2 pieces 14294
ENU
11