Exploded View; List Of Spare Parts; Safety Precautions; Limitation Of Liability - FINO DOSIL 14290 Información Sobre El Uso

5. Exploded View

6. List of Spare Parts

1 Main switch 10 1 piece straight screw connection
2 Push-button 1/4"-6x1
3 Mixing head flange 11 1 piece gasket 1/4"
4 Mixing head for FINODOSIL 12 Dosage pump
Dosing and Mixing Unit 13 2 pieces lid/pump flange
5 1 piece spring 14 1 piece reducing nipple 1/4"-3/8"
6 1 piece ball 15 1 piece angled screw connection
7 1 piece gasket 1/8" 3/8"-12x1
8 1 piece straight screw connection 16 1 piece polyamide tubing 12x1
1/8"-6x1 17 Capacitor 230 Volt
8a 1 piece union nut 18 Capacitor 115 Volt
9 1 piece mecanyle tube 6x1 19 1 piece coupling plug
4
20 1 piece coupling
21 1 piece bottle adapter
22 1 piece o-ring 18 x 2
23 2 pieces material reservoir
24 2 pieces micro fuse (1A/T)
25 Power cable
26 Housing
27 1 piece hexagon socket screw
28 1 piece gearwheel with key grove
29 1 piece gearwheel without
key grove
30 1 piece shaft sealing

7. Safety Precautions

Attention! Please read these instructions carefully before connecting and putting into service. The relia-
bility and the functionality of the unit can only be ensured, if the general governmental accident prevention
regulations as well as the safety information in the manual are respected.
• Before operation please check the proper condition and operational safety of the unit.
• The voltage mentioned on the type plate has to correspond with the voltage of the power source.
• The machine shall only be connected to a socket with protective conductor.
Never connect or disconnect the main plug with wet or moist hands.
• The unit must be put in operation if power cable or plug show visible damages.
• The machine must stand on an even surface, which has to be sufficiently stable and
resilient for the operating weight.
• To avoid penetration of water (e. g. splashing water), the unit should be set up in a dry place.
• Do not put any objects into the unit.
• Do not lock the pushbutton of the unit.
• Before cleaning and maintenance or replacement of spare parts disconnect the main plug.
• The signs and stickers have to be kept readable and shall not be removed.
• The unit may only be opened and maintained by authorised personnel.
The power supply has to be disconnected.
• Approved operators: the unit owner must make the user manual accessible to the operators.
He also has to make sure that any approved operator has read and understood them.
Only after this the operator is allowed to put the machine into operation.
• Wrong of faulty spare parts can compromise safe operation.
They additionally may lead to damages, malfunctions or total failure.
Therefore: Use only genuine spare parts from the manufacturer. Procure spare parts from an authorised
dealer or directly from the manufacturer. Our products are undergoing a continuous further development.
We reserve the right of changes in construction and composition.

8. Limitation of Liability

All data and information in this user manual were complied in due consideration of the effective standards
and regulations, the state of technology as well as our long-standing knowledge and experiences.
The manufacturer does not assume liability for damages caused by:
• Nonobservance of the user manual
• Use not according to specifications
• Operation by personnel that is not trained
• Arbitrary alterations
• Technical conversions
• Use of not certified spare parts
In case of special models, the choice of additional order options or due to latest technical developments the
actual scope of delivery might differ from the here given information and description. The agreed obligations
of the supply agreement, the general terms and conditions as well as the terms of delivery of the manu-
facturer and the legal regulations that were valid at the time of conclusion of contract apply.
ENU
5