Tabla De Contenido; Symbols Used In This Document; Unilift Cc 5, Cc 7 And Cc 9 Pumps - Grundfos Unilift CC 5 Manual Del Usuario

English (GB) Installation and operating instructions
Original installation and operating instructions.
CONTENTS
1. Symbols used in this document
2. Unilift CC 5, CC 7 and CC 9 pumps
3. Applications
4. Identification
5. Functions
6. Operating conditions
7. Installation
7.1 Installation dimensions
7.2 Pump location
7.3 Connection of discharge pipe
7.4 Adjustment of cable length for float switch
7.5 Electrical connection
8. Operation
8.1 Self-venting
8.2 Manual operation
8.3 Automatic operation
8.4 Pumping to low water level
8.5 Thermal protection
9. Maintenance
9.1 Cleaning
10. Technical data
10.1 Electrical data
10.2 Sound power level
10.3 Dimensions
11. Fault finding
12. Service
13. Disposal
Warning
Prior to installation, read these installation
and operating instructions. Installation and
operation must comply with local
regulations and accepted codes of good
practice.
Warning
The use of this product requires
experience with and knowledge of the
product.
Persons with reduced physical, sensory or
mental capabilities must not use this
product, unless they are under
supervision or have been instructed in the
use of the product by a person
responsible for their safety.
Children must not use or play with this
product.
2

1. Symbols used in this document

Warning
Page
If these safety instructions are not
observed, it may result in personal injury.
2
2
If these safety instructions are not
3
Caution observed, it may result in malfunction or
damage to the equipment.
3
3
Notes or instructions that make the job
Note
3 easier and ensure safe operation.
4

2. Unilift CC 5, CC 7 and CC 9 pumps

4
4
5
6
6
6
6
6
6
7
7
7 Fig. 1 Pump with and without float switch
7
1. Adapter
8
2. Non-return valve
8
3. Handle
8
4. Top discharge port
8
5. Side discharge port and plug
9
The side discharge port is plugged from factory.
10
6. Suction strainer
10 7. Clamp
8. Float switch.
1
2
3
4
7
5
6
8
1
2
3
4
5
6