Confirming The Hdmi Function - Sherwood RD-6506 Instrucciones De Funcionamiento

RD-6506(A)_ENG_110408_RD-6506(A)_ENG 2011-04-11 오전 11:41 페이지 27

CONFIRMING THE HDMI FUNCTION

To use the HDMI control functions properly, it is recommend to confirm the HDMI control functions usable with each
connected component by performing the following operations.
■Note :
• Some HDMI control functions may not work with certain components and TV that are not compatible with them.
Before operation
• Check that this receiver, TV and player, etc are connected by HDMI cabels.
• Check that the HDMI control of TV and the HDMI-connectable player are enabled.
(For details on the setups of TV and player, refer to their operating instructions.)
• Set the HDMI CONTROL and the POWER CONROL to ON to enable the HDMI control of this receiver.
(For details, refer to "SETTING THE HDMI" on page 41.)
Confirming the basic HDMI operations
1.
Turn the power on for all the components connected by HDMI cables.
2.
Switch the TV input to the HDMI input connected to this receiver.
3.
Switch this unit input to the HDMI input source.
• Confirm that its picture is displayed and the sound is heard from the speakers properly.
Confirming the HDMI control functions
1.
Turn the power on for all the components connected by HDMI cables.
2.
Turn the TV off to enter the standby mode.
• Confirm that all the components are turned off.
3.
With all the components off, start playback on a player (connected by HDMI cable).
• Confirm that all the components are turned on and the inputs of this unit and TV are switched automatically.
27