Additional Safety Instructions; Product Handling - YATO YT-82600 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 50
GB
Personal safety
Commence work in good physical and psychological conditions. Pay attention to what you do. Do not work if you are
tired or under eff ects of medicines or alcohol. Even a moment's inattention during work may lead to serious injuries.
Always use individual means of protection. Always wear goggles. Using individual means of protection, such as dust-masks,
protective shoes, helmets and hearing protections permits to reduce the risk of serious injuries.
Avoid accidental activation of the tool. Make sure the switch is in the OFF position, before you connect the tool to the
mains. Holding the tool with a fi nger on the switch or connecting an electric tool when the switch is in the ON position may lead
to serious injuries.
Before you turn an electric tool on remove all the spanners and other tools, which have been used for adjustments. A
spanner left on rotating elements of the tool may lead to serious injuries.
Keep your balance. Maintain an appropriate position. It will permit to control the electric tool in case of unpredicted situations
during its operation.
Use protective clothes. Do not wear loose clothes or jewellery. Keep your hair, clothes and gloves away from moving
elements of the electric tool. Loose clothes, jewellery or long hair may get caught on moving elements of the tool.
Use dust extractors or dust containers, if the tool is equipped with any. Make sure they are properly connected. Using of
dust extractors permits to reduce the risk of serious injuries.
Operation of the electric tool
Do not overload the electric tool. Use a proper tool for the given purpose. A correct selection of the tool for the given work
will result in a more effi cient and safer work.
Do not use the electric tool if the switch is not functioning properly. A tool which may not be controlled by means of a switch
is dangerous and must be repaired.
Disconnect the plug from the mains socket before any adjustment, replacement of accessories or storage of the tool. It
will permit to avoid accidental activation of the electric tool.
Store the tool away from children. Do not allow untrained persons to operate the tool. An electric tool may be dangerous
in hands of an untrained person.
Make sure the tool is properly maintained. Check the tool in order to detects any unfi tting or loose moving elements.
Check whether the elements of the tool are not damaged. In case any damaged elements of the tool are detected, they
must be repaired before the electric tool is operated. Many accidents are caused by improper maintenance of tools.
Cutting tools must be sharp and clean. Properly maintained cutting tools are easier to control during work.
Use electric tools and accessories in accordance with the aforementioned instructions. Use the tool in accordance with
its purpose, taking into account the kind and conditions of work. Should the tool be used for other applications than the ones
it has been designed for, the risk of a dangerous situation increases.
Repairs
The tool may be repaired only by authorised service centres, which must use solely original spare parts. It will guarantee
a proper level of safety of operation of the electric tool.

ADDITIONAL SAFETY INSTRUCTIONS

Wear hearing protectors when working with this tool. Exposure to noise can cause hearing loss.
Use this tool with auxiliary handle grips supplied with the tool. Loss of control may cause personal injury to the operator.
Use dust protection masks. Use of anti-dust mask reduces the risk of serious body injuries.
When working, where the inserted tool may come into contact with hidden live wire, hold the power tool using insulated handles.
Inserted accessory when coming into contact with a live wire may cause metal components of the tool to become energized, which
could result in electric shock to the operator of tool.

PRODUCT HANDLING

Attaching the poker to drive unit
Model YT-82600 (II)
Pull off the threaded bushing and check the condition of gasket around the coupling. If any damage to gasket is found, it should
be replaced with a new one before the start of work. Slide the end of the fl exible poker tube onto the protruding part of the drive
shaft of the drive unit.
Screw the threaded bushing onto the thread of the drive unit. Check whether the poker will not disconnect automatically during
operation.
Model YT-82601
Turn the handle lock so that the notch gets inside coupling and allows inserting the coupling of poker's fl exible shaft into drive
unit's mounting hole (II). Insert the fl exible shaft coupling so that one of notches overlaps with the handle lock. Turn the handle
O R I G I N A L
I N S T R U C T I O N S
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Yt-82601

Tabla de contenido