Cub Cadet ST15E Manual De Instrucciones página 10

3. If the battery pack does not charge properly:
a. Check operation of receptacle by plugging in a
lamp or other appliance;
b. Check to see if receptacle is connected to a light
switch which turns power off when you turn out
the lights;
c. Move the charger and battery pack to a location
where the surrounding air temperature is
approximately 65° F - 75° F (18° C - 24° C);
d. If charging problems persist, take the tool, battery
pack and charger to your local service center.
4. The battery pack should be recharged when it fails to
produce sufficient power on jobs which were easily
done previously. DO NOT CONTINUE to use under these
conditions. Follow the charging procedure. You may also
charge a partially used pack whenever you desire with no
adverse effect on the battery pack.
BATTERIES & CHARGERS
5. Foreign materials of a conductive nature such as, but
not limited to, grinding dust, metal chips, steel wool,
aluminum foil or any buildup of metallic particles should
be kept away from charger cavities. Always unplug the
charger from the power supply when there is no battery
pack in the cavity. Unplug the charger before attempting
to clean.
6. DO NOT freeze or immerse the charger in water or any
other liquid.
Charger Cleaning Instructions
Shock hazard. Disconnect the charger from the
AC outlet before cleaning. Dirt and grease may be
removed from the exterior of the charger using a cloth
or soft non-metallic brush. DO NOT use water or any
cleaning solutions.
10
WARNING