Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
Always turn the unit off when operation is delayed or when
carrying the unit from one location to another.
•
Before setting the unit down, always turn the unit off and
wait for all moving parts to come to a complete stop.
•
Avoid starting the unit unintentionally. Make sure the trigger
lockout is in the locked position before installing or removing
the battery. Never carry the unit with fingers on the trigger.
•
Remove the battery from the unit when it is not in use.
•
DO NOT use the unit if the trigger and trigger lockout DO NOT
start and stop the unit.
•
If the unit strikes or becomes entangled with a foreign object,
stop the motor immediately, remove the battery and check
for damage. If damaged, DO NOT restart or operate the unit
until it is repaired. DO NOT operate the unit with loose or
damaged parts.
•
Use only original equipment manufacturer (OEM)
replacement parts and accessories for this unit. These are
available from your authorized service dealer. Use of any
other parts or accessories could lead to serious injury to the
user, or damage to the unit, and void the warranty.
•
Keep the unit clean. Stop the motor, remove the battery and
allow the unit to cool. Carefully remove vegetation and other
debris that could block moving parts.
•
If the unit starts to vibrate abnormally, stop the motor,
remove the battery and allow the unit to cool. Inspect the
unit for the cause of the vibration. Vibration is generally an
indicator of trouble.
Trimmer Safety
•
Only use the trimming line described in the separate
supplement. Never use metal-reinforced line, wire, chain or
rope. These can break off and become dangerous projectiles.
•
DO NOT replace the cutting head with rigid or metal blades.
Doing so could result in serious injury.
•
The cutting head shield must always be in place while
operating the unit. DO NOT operate the unit without both
trimming lines extended and the proper line installed.
DO NOT extend the trimming line beyond the length of
the shield.
•
Adjust the handle to provide the best grip, if applicable.
•
Make sure the cutting head is not in contact with anything
before starting the unit.
•
Always hold the unit with both hands when operating. Using
only one hand could lead to a loss of control and result in
serious personal injury.
•
Keep hands and feet away from the cutting area.
SAFE OPERATION PRACTICES
Other Safety Warnings
•
Maintain the unit with care. Follow all maintenance
instructions in this manual.
•
DO NOT perform maintenance procedures other than those
described in this manual. DO NOT attempt to repair the unit;
there are no user-serviceable parts inside. All service, other
than the maintenance procedures described in this manual,
should be performed by an authorized service center.
•
DO NOT use the unit if it is not working correctly, has been
dropped, damaged, left outdoors or dropped into water. Have
the unit serviced by an authorized service center.
•
Never remove, modify or make inoperative any safety device
furnished with the unit.
•
Before inspecting, maintaining, cleaning, storing,
transporting or replacing any parts on the unit:
1. Stop the motor. Refer to Switching Trimmer On & Off.
2. Wait for all moving parts to stop.
3. Remove the battery.
4. Allow the unit to cool.
•
Secure the unit while transporting.
•
Store the unit in a dry place, secured or at a height to prevent
unauthorized use or damage. Keep the unit out of the reach
of children.
•
Never douse or squirt the unit with water or any other liquid.
Avoid getting water in the motor and electrical connections.
Keep handles dry and clean (free from debris, oil and grease).
Clean the unit after each use. Refer to Maintenance. DO NOT
use solvents or strong detergents.
•
Keep these instructions. Refer to them often and use them to
instruct other users. If you loan this unit to others, also loan
them these instructions.
SAVE THESE INSTRUCTIONS
5
Publicidad
Tabla de contenido
