About The Power Supply; Attaching The Battery To The Afi Back - LEAF AFi Guia De Inicio Rapido

60

About the Power Supply

Attaching the Battery to the AFi Back

In normal operation, the AFi is powered using a single battery located in
the handgrip. However, in some circumstances you may wish to use a
second battery on the AFi back. For example:
•
For the flexibility to remove the AFi back and continue working while
the power is still on for review and file management.
•
As a way of keeping a battery on hand. When the battery in the
handgrip becomes exhausted, the secondary battery can replace it in
the handgrip.
Press the button on the underside of the AFi back to remove the
1.
battery slot cover.
Figure 1: Removing the battery slot cover
Press the battery into the recess on the underside of the AFi back, and
2.
then slide it across until it snaps into place.
Figure 2: Inserting the battery
Chapter 4 – Power Supply
Back Battery Release