LEAF AFi Guia De Inicio Rapido página 98

34
Setting the EV Compensation
Setting the Flash Mode
Setting the Flash EV Compensation
Push the Meter Mode button and rotate the rear dial to select the
amount of EV compensation.
You can compensate +/-5 EV. EV compensation is indicated in the
viewfinder LCD as well as the handgrip LCD.
Figure 22: Flash Button
Push and hold the Flash button, and rotate the front dial to select one
of the following:
•
: The flash is triggered immediately as the shutter
Normal Sync
opens.
•
: The flash is triggered just before the shutter closes.
Rear Sync
Note: The Leaf AFi can use TTL flash via a Rollei SCA 3562 adapter connected to
the Flash Shoe on the side of the camera. Electronic flash can also be used by
connecting a PC cord to the Flash Sync socket or via a wireless remote device
connected to the Flash Shoe.
Push and hold the Flash button, and rotate the rear dial to select the
desired amount of EV compensation. You can compensate +/-3 EV.
Chapter 2 – Getting Started