Fitting The Cutt-Off Wheel Guard; Repairs; Environmental Protection; Technical Specifications - Metabo W 7-115 Instrucciones De Manejo

Ocultar thumbs Ver también para W 7-115:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
0.2" - 0.4"). Slacken off the two wing screws and
adjust the wheel guard evenly upwards or down.
Retighten wing screws.
12.6
Fitting the cut-off wheel guard
Remove the wheel guard (4). Fit the cut-off wheel
guard (o) by aligning the 3 raised retention nibs
on the guard with the slots on the flange. Push
the guard on fully, then rotate the guard and
position the guard between the operator and
the wheel. Tighten the clamping screw to secure
the guard in position.

13 Repairs

Repairs to power tools must be carried
out by a qualified electrician only.
Any Metabo power tools in need of repair can be
sent to one of the addresses listed on the second-
last page.
Please send the tool for repair with a brief
description of the fault identified.

14 Environmental Protection

Metabo packaging is 100% suitable for recycling.
Power tools and accessories at the end of their
service life still contain large amounts of valuable
raw materials and plastics which can likewise be
fed back into a recycling process.
As the dust generated during grinding/cutting may
contain harmful materials, do not dispose of it
along with domestic waste but ensure it is taken
to a collection point for special waste for proper
disposal.
These Operating Instructions are printed on paper
produced in a chlorine-free bleaching process.
14

15 Technical Specifications

Notes on the details on page 2.
We reserve the right to undertake modifications to
reflect technical advances.
D
o
max
n
M
P
1
P
2
I
120V
a
hw
Typical A-rated acoustic level:
L
pA
L
WA
m
Measured values established according to
EN 50144.
The stated technical specifications are subject to
tolerances (as specified in the respective current
standards).
= maximum grinding disc diameter
= no-load speed
= spindle thread
= rated input
= output power
= current at 120 V
= typically rated acceleration in the
hand-arm area
= acoustic pressure level
= acoustic power level
Wear ear protectors!
= weight

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido