Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch PLL 5 Manual Original

– Attaching with adhesive tape (see figure H): The holder (2) can also be
attached with commercially available adhesive tape (not included in the
delivery scope) as shown in the figure.
For all three methods, ensure that the holder (2) is fastened securely to the
structural surface. The holder slipping out of position can lead to incorrect
measurements.
Position the measuring tool with the magnets (13) on the metal plate (1) of
the holder (2).
Belt Clip
Using the belt clip (4), the measuring tool can, for instance, be hooked to a
belt so it is always to hand.

Maintenance and Service

Maintenance and Cleaning

Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a damp, soft cloth. Do not use any detergents or
solvents.
The areas around the outlet aperture of the laser in particular should be
cleaned on a regular basis. Make sure to check for lint when doing this.

After-Sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance
and repair of your product as well as spare parts. You can find explosion
drawings and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any ques-
tions about our products and their accessories.
In all correspondence and spare parts orders, please always include the
10‑digit article number given on the nameplate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Bosch Power Tools
English | 21
1 609 92A 56M | (23.08.2019)