Attention; Brief Introduction - ADInstruments AD6412 Manual De Usuario

_______________________________________________________________________________
3. Single-Point Grounding System...........................................12
. Bill of Loading..........................................................................13
I. Attention
Thank you for purchasing this pincer ground tester of the company. In order to make
better use of the product, please be certain:
-- To read this user manual carefully.
-- To comply with the operating cautions presented in this
manual.
‹ Under any circumstances, pay special attention to safety in the use of the Meter.
‹ Pay attention to the measurement range of the Meter and the using environment
provided.
‹ Pay attention to the text labeled on the panel and back plane of the Meter.
‹ Before booting up, the trigger should be pressed for a couple of times to ensure the
jaws are well closed.
‹ In the process of auto inspection in booting up, DO NOT press the trigger, nor clamp
any wire.
‹ The process of auto inspection would display "CAL6, CAL5, CAL4 CAL0, OL ."
‹ Before the auto inspection is completed and the "OL " symbols are showed, the
measured objects cannot be clamped on.
‹ The jaw planes contact must be maintained clean, and should not be polished with
corrosive and rough materials.
‹ Avoid any impact onto this Meter, especially the jaw contact planes.
‹ This Meter will have some buzzing sound in measurement process, and it is normal.
‹ The measurement current of the wire should not exceed the upper limit of the Meter.
‹ Please take out the batteries in the case of the Meter being idle for a long time.
‹ The dismantling, calibration and maintenance the Meter shall be operated by the
authorized staff.
‹ If the continuing use of it would be dangerous, the Meter should be stopped using
immediately, and immediately sealed for the treatment by the authorized agencies.
‹ The contents in this user manual marked with " " are limited to AD6412.
II. Brief Introduction
©Copyright Abacanto Digital SA.
Manual de usuario AD6412
AD Instruments
29