Rear Panel - Renishaw UCC T3 Guia De Instalacion

UCC T3 installation guide
www.renishaw.com
Connectors and signals for the UCC T3
controller

Rear panel

The connectors on the rear panel of the UCC T3 controller enclosure are shown below:
DC power in
3W3 socket. The UCC T3 controller is powered from an external DC power source through this connector, which can be purchased in a
connector kit from Renishaw.
Pin Function
A1 0 V
A2 24 V to 80 V
A3 0 V
DC power specification
• Voltage 24 V to 80 V
• Current input to 10 A
The UCC T3 controller requires 30 W of power to support the controller functions integrated into the unit. This must be factored into the
power supply used.
CAUTION: For ambient temperatures between 40 °C and 50 °C, the maximum input power should be 400 W.
CAUTION: UCC T3 is not recommended for use in ambient temperatures above 50 °C.
Issued 04 2019
22