Renishaw UCC T3 Guia De Instalacion página 31

UCC T3 installation guide
www.renishaw.com
NOTE: Periodically cycle E-STOP buttons, reset push buttons and check for correct position.
The E-STOP buttons should be cycled regularly by operators to ensure correct operation, the frequency of testing having been determined by
user risk assessment.
If the reset push button has been fitted, it should be tested regularly by operators to ensure correct operation, the frequency of testing having
been determined by user risk assessment.
CAUTION: It is strongly recommended that the CMM manufacturer or retrofitter includes a periodic test of the emergency stop
and, if fitted, the associated reset switch, in their maintenance instructions.
E-STOP with reset implementation
There are five methods of implementing the E-STOP circuit.
Single pole E-STOP E-STOP button with reset:
Dual pole E-STOP button with reset:
E-STOP without reset implementation
Single pole E-STOP button without reset:
Dual pole E-STOP button without reset:
Issued 04 2019
31