Distributor - Extel WEVPMH 001 Instrucciones De Uso

3
SPECIFICATION
1. 13 cm colour screen
2. Microphone to communicate with the roadside panel.
3. Communication with the roadside panel.
4. Control of an electrical lock or strike (12 VDC output
on the L+ L- terminals of the power supply unit).
5. Key Resume the image or stop video and communica-
tion.
6. Call button in intercommunication mode
7. Menu browser.
8. The "in use" indicator turns on when a communication
is established on the network (note that the roadside
panel/ monitor communication has priority over the inter-
communication).
9. If the "mesg" indicator is turned on, function "do not disturb" active.
10. At the back of the monitor, RJ45 connector to connect to the distributor.
1. Microphone: allows the visitor to communicate with the internal unit
2. Colour lens of the camera, CCD with adjustable automatic iris.
3. Infrared LEDs for half-light vision, for night vision use an additional lighting system.
(Not visible to the naked eye)
4. LCD screen to view the list of names, and the menus (non accessible by the visi-
tors)
Also to type the secret code for the access opening or to program the video door
phone (if you are administrator)
6. Speaker: allows to be heard outside.
1. Power supply P+ P-
2. Next distributor output
3. Previous distributor or roadside panel input.
4. Inputs for 4 monitors
5. Switch: Put imperatively the last distributor in "HI" position
We count 1 distributor for 4 monitors, use one or several additional
distributor(s) according to the number of monitors.
4GB
CFI EXTEL WEVPMH 001 - 03/2010 - V1
1 2 3
4 5 6
7 8 9
0 #
*
Fig 3
Fig 1
Fig 2