Connection Additional Monitor(S) In A Dwelling - Extel WEVPMH 001 Instrucciones De Uso

11 CONNECTION OF ADDITIONAL MONITOR(S) IN A DWELLING
The additional monitor(s) (max 2 per dwelling) connect as the main ones.
Respect the number of distributor and power supply unit as indicated on the main wiring diagram.
Dwelling 2
monitor 2
Dwelling 1
monitor 1
Parameterisation to perform:
Before registering the monitors on the roadside panel, it is recommended to modify the number of characters to type in
the list of names.
To do so, enter the "configuration" menu, on the keypad type #8001, and then enter the administrator code (66666666
Then type "7" select "2" then validate by #.
Only 2 characters are to be typed on the keypad to call a dwelling. (In the event of a building of more than 99 dwellings, you
have to call our phone support for another procedure).
Now you can register the monitors on the roadside panel by referring to the chapter 5,c.
You have to impose a special code for the additional monitors.
If the main monitor has the No. XX, you have to register the additional monitor under the No. 1XX, and the 2nd additional
one under the No. 2XX.
It is mandatory to indicate to the system that some dwellings have several monitors.
To do so, refer to chapter 9, in the "option management" menu, and then chapter 6 "additional monitors".
additional monitor max in one or several dwellings.
(In the case of an installation for dwellings with 1 additional monitor and others with 2, you have to enter the max. number,
namely 2).
16GB
to the next distributor
(last distributor switch in HI position)
distributor 1
(switch in 120 position)
(if single distributor:
switch in HI position)
L+ L- L+ L- ML+ ML- P+ P-
+ -
power supply unit
CFI EXTEL WEVPMH 001 - 03/2010 - V1
ML- ML+
roadside panel/camera
P+ P-
back of the panel/
camera
Dwelling 3
monitor 4
monitor 3