• En g lish
HowTo Use
Start/Pause/Sleep
• Sleep: Robot is idle; Power switch is on and indicator light is
• Standby: Robot is not working; Power switch is on and light at main button is
pulsing.
• Start: Robot is working; Green light at Auto button stays on.
0
Turn on the Robot
• Turn on the power switch on the side of the main body.
• Press ® on the main body to start cleaning.
8
• Press
on the remote control to start cleaning.
Note:
While in Sleep mode, press ® to activate standby mode. Press ® again to
start cleaning.
f) Pause
• Pause means switching from cleaning to standby. To pause a cleaning cycle,
8
press
on the remote control or ® on the main body.
Note:
The robot accepts new tasks once it is paused.
8
Sleep
• To enter Sleep Mode:
A. Press and hold ® for 3 seconds.
B. Robot enters Sleep mode automatically after idling for 10 minutes.
Robot
• Auto Mode ®
A. Press to activate robot from Sleep Mode to standby.
B. Press to start cleaning while on standby.
C. Press to pause while robot is cleaning
For more detailed information , p lease visit: www.zacorobot.eu
Z/\CO
off.
P11