Lnvisiblewall; Power Switch - ZACO A9s Manual Del Usuario

• En g lish
HowTo Use

lnvisibleWall

lnvisibleWall creates an invisible barrier that A9s will not cross. This invisible
barrier can be used to confine A9s to a particular room or area.
• lnstall battery first, then turn it on.
• Put the lnvisibleWall on the outside of the doorway you wish to block.
• Ensure the signal logo is facing forward and toward the opening
you would like to block.
• Turn off the lnvisibleWall after each use.
TIPS:
• Make sure which side is working area according to the stickers on the
lnvisibleWall.
• Place the robot in the "working area" to do cleaning.
For more detailed information , p lease visit: www.zacorobot.eu
�-- Power Switch
Signal Light
Signal Transmitter
Battery Lid
Z/\CO
P17