Juniper Networks NetScreen-5GT Wireless Manual Del Usuario página 31

The following table summarizes the port, interface, and zone bindings for the port modes
that are available on the NetScreen-5GT Wireless ADSL devices:
a
Port Name
1
2
3
4
Untrusted
Modem
ADSL
a. As labeled on the NetScreen appliance chassis.
b. Default port mode.
c. You can configure a backup interface to the Untrust zone, using either the Untrusted Ethernet port or the
Modem port. See
To change the NetScreen device to the Home-Work port mode:
WebUI
Configuration > Port Mode: Select Home-Work from the drop-down list, and then
click Apply.
At the following prompt, click OK:
Operational mode change will erase current configuration and reset the device,
continue?
CLI
exec port-mode home-work
At the following prompt, enter y (for yes):
Change port mode from <trust-untrust> to <home-work> will
erase system configuration and reboot box
Are you sure y/[n]? y
NetScreen-5GT Wireless
Trust-Untrust Port Mode
Interface Zone
trust Trust
trust Trust
trust Trust
trust Trust
c
untrust Null
c
serial Null
adsl1 Untrust
wireless1 Wzone1
wireless2 Trust
"Configuring a Backup Untrust Zone Interface" on page
Home-Work Port Mode
b
Interface Zone
ethernet1 Work
ethernet1 Work
ethernet2 Home
ethernet2 Home
c
ethernet3 Null
c
serial Null
adsl1 Untrust
wireless1 Wzone1
wireless2 Work
wireless3 Home
Optional Configuration
Trust/Untrust/DMZ
(Extended) Mode
Interface Zone
ethernet1 Trust
ethernet1 Trust
ethernet2 DMZ
ethernet2 DMZ
c
ethernet3 Null
c
serial Null
adsl1 Untrust
wireless1 Wzone1
wireless2 Trust
wireless3 DMZ
wireless4 Wzone2
28.
27