Disassembly And Disposal; Maintenance - SICK GSE6L Instrucciones De Uso

9

DISASSEMBLY AND DISPOSAL

9 Disassembly and disposal
10

Maintenance

12
LED indicator/fault pattern
Yellow LED lights up, no object
in the path of the beam
The sensor must be disposed of according to the applicable country-specific regula‐
tions. Efforts should be made during the disposal process to recycle the constituent
materials (particularly precious metals).
NOTE
Disposal of batteries, electric and electronic devices
• According to international directives, batteries, accumulators and electrical or
electronic devices must not be disposed of in general waste.
The owner is obliged by law to return this devices at the end of their life to the
•
respective public collection points.
•
WEEE: This symbol on the product, its package or in this document, indi‐
cates that a product is subject to these regulations.
SICK sensors are maintenance-free.
We recommend doing the following regularly:
• Clean the external lens surfaces
Check the screw connections and plug-in connections
•
No modifications may be made to devices.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
Cause
The beam of light of a photo‐
electric through-beam sensor
hits the receiver of another
(neighboring) photoelectric
through-beam sensor
Measures
ter is set to the max. sensitiv‐
ity: Reduce the distance
between the sender and the
receiver / Check sensing
range and adjust if necessary
Swap the sender and receiver
arrangement at every sec‐
ond through-beam photoelec‐
tric sensor and ensure that
there is sufficient distance
between the through-beam
photoelectric sensors : see
figure 1, page 7
8025390 | SICK
Subject to change without notice