Troubleshooting - POLTI cimex ERADICATOR Manual De Instrucciones

TROUBLESHOOTING

PROBLEM
The appliance does not
switch on
"Out of water" indicator
light (J) is on
No HPMed consumption
during use
If problems persist or are not listed above, please contact our Polti Customer Services.
USA: 1-888-99-POLTI (1-888-997-6584)
Monday - Friday: 8am - 6pm EST
CIMEX ERADICATOR
Check that the appliance is correctly plugged into a suitable
current socket.
Ensure that the appliance has been turned on using the
ON/OFF switch (B).
There is no water in the boiler.
Fill according to the instructions given in this manual.
Check that the wick has been inserted correctly into the hole of
Steam Disinfector.
19
SOLUTION