Items Supplied; Unpacking And Setting Up - Silvercrest SEM 1050 A1 Instrucciones De Servicio

WARNING! Risk of material
damage!
 The device is fitted with non-slip silicon
feet. Because furniture can be coated
with a wide variety of varnishes and
plastics, and treated with various care
products, the possibility cannot be ex-
cluded that some of these substances
have components that may attack and
soften the silicon feet. If necessary,
place a non-slip mat under the device.
 Under no circumstances pour liquids
other than fresh, cold drinking water
into the espresso machine!
 To prevent damage to the heating ele-
ment, do not operate the device without
water in the water tank.
 Only use the device with the original
accessories.
 Place the device on a stable, level sur-
face.
 During operation, (hot) water and
steam, espresso and espresso powder
can accumulate on the base. Therefore,
place the device on a waterproof, heat-
resistant worktop.
 Do not use any astringent or abrasive
cleaning agents.
 Do not expose the device to tempera-
tures below the freezing point.
4.

Items supplied

1 espresso machine
1 portafilter 19
1 filter for single espresso 2
1 filter for double espresso 1
1 coffee spoon with tamper 9
1 copy of the user instructions
5. Unpacking and
setting up
1. Remove all packing material.
2. Check to ensure that all parts are pres-
ent and undamaged.
3. Remove adhesive strips and stickers,
but not the rating plate.
4. Clean all parts before the first
use (see "Cleaning" on page 67).
5. Place the device on a dry, level, non-
slip surface.
WARNING! Risk of material damage!
 During operation, (hot) water and
steam, espresso and espresso powder
can accumulate on the base. Therefore,
place the device on a waterproof, heat-
resistant worktop.
57
GB