Preparation; Connection; Full Hd Matrix - ClickTronic 60810 Manual Del Usuario

5.2 Preparation:

To set the audio output caliber, read the manual
of the source device.
1. Check the audio format of the movie or of
the TV signals. (stereo / DTS® 5.1/or Dolby®
Digital 5.1, 7.1 etc.)
2. Adjust the audio format of the source device
(e.g. uncompressed PCM- or digital Dolby
signals (Dolby® 5.1, 7.1))
3. Select the output of the respective audio
format and the language by using the main
menu.
• If the output devices do not support the ad
justed audio format (HDTV, Receiver or spea-
ker system), you will hear noise or no tone at
all. In doubt make sure of having connected
all components correctly.
• In case of using a home cinema system or
another speaker system, we recommend to
mute the speaker of your HD TV.
• The product comes with a mode, named
"highest common accordance". By using the
Full HD Matrix in splitter mode, the source
device with the lowest standard will be auto-
matically adjusted as primal device.
• We recommend choosing the same high reso-
lution, color depth and audio format of the
source device and output device.

5.3 Connection:

1. Connect the included power supply with the
DC socket of the Full HD Matrix.
2. Connect the outputs of the source device to
the inputs of the Full HD Matrix by HDMI
cable.
3. Connect the inputs of the HD output devices
to the outputs of the Full HD Matrix by HDMI
cable.
3. After connecting all cables, the Active A LED
(or Active B LED) flashes red for the outputs
and the channel LEDs flashes green for the
inputs.
5.4 Operation:

5.4.1 Full HD Matrix:

In this mode you can choose one source device
per output device.
In this mode you can transmit the signal of one
source device to both output devices.
Clicktronic®
TM
TM
17