Technical Specifications; Declaration Of Conformity; Manufacturer's Warranty - STEINEL PROFESSIONAL HG 2120 E Manual Del Usuario

Technical specifications

HG 2320 E
Voltage 230 V, 50/60 Hz
Output 2300 W max.
Airflow adjustment continuously adjustable
Stage 1
Airflow rate (l/min.) 150
Temperature (°C) 80
Temperature setting infinitely variable in 10 °C steps
by pushbutton
Programmes 1 = 250 °C / approx. 350 l/min
2 = 350 °C / approx. 400 l/min
3 = 450 °C / approx. 500 l/min
4 = 550 °C / approx. 400 l/min
Residual heat indicator Yes
Memory button for changing programmes set
Protection class II
(without earth terminal)
Thermostat Yes
Thermal cut-out Yes
Emission sound pressure level ≤ 70dB (A)
Total vibration value ≤ 2.5 m/s
Weight 960 g
HG 2120 E settings
Airflow rate stage 2 low airflow rate
Thumbwheel Temperature approx.
1 80 °C
2 110 °C
3 190 °C
4 280 °C
5 360 °C
6 440 °C
7 500 °C
8 570 °C
9 630 °C
Depending on how accurately the thumbwheel is set, the guide values shown may differ by up to +/- 20 °C from the
temperature actually delivered.
Usage
Here are some of the applications you can use STEINEL hot air
tools for. This selection is by no means exhaustive – no doubt
you can immediately think of other examples.
Stripping paint: paint is softened and can be removed with a
stripping knife and paint scraper to leave a clean surface.
Applying heat-shrinkable tubings: The shrink tubing is
slipped over the section you want to insulate and heated with
hot air. The tubing shrinks by approx. 50% in diameter to give
a sealed union. Shrinking is particularly fast and even using
reflector nozzles. Sealing and stabilising cable breaks,
insulating soldered joints, gathering cable runs, sheathing
terminal blocks.
Shaping PVC: tiles, piping or ski boots can be softened and
formed with hot air.
Shaping: ski boots and sports shoes can be shaped for a
perfect fit.
HG 2120 E
220-230 V, 50/60 Hz
2200 W max.
–
2 1 2 3
150-500 150 150-300 300-500
80-650 80 80-630 80-630
continuously in 9 steps
by thumbwheel
–
No
–
II
–
Yes
≤ 70dB (A)
2 / K = 0.04 m/s 2 ≤ 2.5 m/s 2 / K = 0.04 m/s
850 g
Subject to technical modifications
Airflow rate stage 3 high airflow rate
Thumbwheel Temperature approx.
1
2
3
4
5
6
7
8
9
Desoldering: electronic components are detached quickly
and neatly from circuit boards with a reduction nozzle.
Soft soldering: First, clean metal parts you want to join. Then,
using hot air, heat the point you want to solder and offer up the
soldering wire. Use flux or a soldering wire with a flux core to
prevent oxide forming.
Welding and joining plastic: all parts being welded must be
of the same plastic material. Use an appropriate welding rod.
Welding sheeting: The sheets are overlapped and welded
together. A slit nozzle is used to direct hot air under the
overlap, then the two sheets are firmly pressed together with
a feed roller.
Also possible: Repairing PVC tarpaulins by overlap welding
with a slit nozzle.
- 14 -
Guide for selecting the right type of welding rod when welding plastics
Material
Rigid PVC
Rigid PE
(HDPE)
Polyethylene
PP
Polypropylene
ABS
Accessories
(see illustrations on the inside cover)
Your retailer has a wide range of accessories for you to
choose from.
1 Surface nozzle 50 mm
2
2 Surface nozzle 75 mm
3 Window nozzle 50 mm
4 Window nozzle 75 mm
5 Paint scraper kit
6 Reflector nozzle
7 Crimp connectors
Ø 0.5-1.5
Ø 1.5-2.5
Ø 0.1-0.5 – Ø 4.0-6.0
80 °C
8 Heat-shrinkable tubing
110 °C
4.8-9.5 mm
180 °C
1.6-4.8 mm
260 °C
4.0-12.0 mm
340 °C Heat-shrinkable tubing set, set of 3 Prod. No. 075811
9 Soldering reflector nozzle
420 °C
10 Reduction nozzle 14 mm
480 °C
11 Reduction nozzle 9 mm
560 °C
12 Fine dust filter
630 °C
13 HL-Scan
14 Wide-slit nozzle
15 Feed roller
16 Plastic welding rod
Rigid PVC:
HDPE:
PP:
ABS:
17 Welding shoe

Declaration of Conformity

(refer to page 160)
Applications Characteristic signs
Pipes, fittings, tiles, structural sections, Chars when held in flame,
technical mouldings pungent odour;
300 °C welding temperature crashing sound
Tubs, baskets, canisters, Light yellow flame, drips continue to burn,
insulating material, piping smells of a candle being extinguished;
300 °C welding temperature crashing sound
High-temperature drainpipes, seat buckets, Bright flame with a blue core,
packagings, automotive parts drips continue to burn, pungent odour;
250 °C welding temperature crashing sound
Automotive parts, equipment enclosures, cases Black, fluffy smoke;
350 °C welding temperature sweet odour;
crashing sound
Disposal
Electrical and electronic equipment, accessories and pack-
aging must be recycled in an environmentally compatible
manner.
Prod. No. 070113
Prod. No. 070212
Do not dispose of electrical and electronic equipment
Prod. No. 070311
as domestic waste.
Prod. No. 070410
Prod. No. 010317
EU countries only:
Prod. No. 070519
Under the current European Directive on Waste Electrical
and Electronic Equipment and its implementation in national
Prod. No. 006655
law, electrical and electronic equipment no longer suitable
Prod. No. 006648
for use must be collected separately and recycled in an en-
Prod. No. 006662
vironmentally compatible manner.
Prod. No. 071417
Prod. No. 071318
Prod. No. 072766

Manufacturer's warranty

Prod. No. 074616
Prod. No. 070717
This STEINEL product has been manufactured with ut-
Prod. No. 070618
most care, tested for proper operation and safety and
Prod. No. 078218
then subjected to random sample inspection. STEINEL
Prod. No. 014919
guarantees that it is in perfect condition and proper
Prod. No. 074715
working order.
Prod. No. 012311
HG 2120 is guaranteed for 12 months or 750 hours of
operation and HG 2320 E for 12 months or 1000 hours of
Prod. No. 073114
operation, each commencing on the date of sale to the
Prod. No. 071219
consumer. We will remedy defects caused by material
Prod. No. 073411
flaws or manufacturing faults. The warranty will be met
Prod. No. 074210
by repair or replacement of defective parts at our own
Prod. No. 070915
discretion. This guarantee does not cover damage to
wearing parts, damage or defects caused by improper
treatment or maintenance nor does it cover breakage
as a result of the product being dropped. Further conse-
quential damage to other objects shall be excluded.
Claims under warranty shall only be accepted if the prod-
uct is sent fully assembled and well packed complete with
sales receipt or invoice (date of purchase and dealer's
stamp) to the appropriate Service Centre or handed in to
the dealer within the first 6 months.
Repair service:
If defects occur outside the warranty
period or are not covered by warranty,
ask your nearest service station for the
possibility of repair.
- 15 -
1
Y E A R
MANUFACTURER'S
WARRANTY