Fresmak Arnold MAT PROX Manual De Instrucciones página 8

tank with the lips facing outwards. Then place the washer (8010) and the collar (8006) with the lips
facing down towards the bottom of the tank.
7. Place the collar (011) on the spindle (8008) and close it with the cover.
8. Then oil the spindle well and place it inside the tank. Take it to the bottom of the tank, separate it
by two millimetres, and correctly position each collar using compressed air applied to the spindle
opening.
9. Stand the unit up vertically. Oil it up to the level with hydraulic oil with a viscosity of 6.5 ºE, then bleed
it carefully and if necessary fill it up with more oil. Insert the primary piston a few millimetres, and then
the disc springs. The clutch unit is now ready to be mounted.
8