English; General Information - Camp Safety GIANT Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 58
The C.A.M.P. Group meets the needs of workers at height with light and innovative products. These are designed, tested
and manufactured to a certified quality system, ensuring reliable and safe products. These instructions inform you about
the correct use throughout the life of the product: read, understand and keep these instructions. If lost, you can
download the instructions from the web site www.camp.it. The retailer must provide the instruction manual in the
language of the country where the product is to be used.
USE
This equipment should be used only by trained and competent persons. Otherwise the user should be under the direct
supervision of a trained and competent person. This notice will not teach you the techniques for work at height or any
other associated activity: you must have received qualified instruction before using this product. Climbing, and any other
activity for which these products may be used, is inherently dangerous. The consequences of incorrect selection, misuse
or poor maintenance of equipment could result in damage, serious injury or death. The user must be medically fit and
capable to control his own security and any possible emergency situations. For equipment intended for use in fall arrest
systems, it is essential for safety that the anchor device or anchor point should always be positioned, and the work carried
out in such way as to minimise both the potential for falls and the potential fall distance. Verify the free space required
beneath the user at the workplace before each occasion of use, so that, in the case of a fall, there will be no collision with
the ground or the other obstacle in the fall path. A full body harness is the only acceptable body holding device that can be
used in a fall arrest system. The product should only be used as instructed and no alterations should be made to it. It may
be used in conjunction with any appropriate items of suitable specification and according to the EN standards, with due
consideration to the limitations of each individual piece of equipment. This leaflet shows examples of improper utilizations
of this product. Note that it is impossible to show or imagine all improper utilizations and that this product should be used
only in the way specified by the manufacturer in this leaflet. If possible this product should be treated as personal.
MAINTENANCE
Cleaning of the textile and plastic parts: rinse in clean water and neutral soap (max temperature 30°C) and dry naturally
away from direct heat. Cleaning of the metallic parts: rinse in clean water and then dry. Temperature: Always keep this
product below 80°C so as not to affect the performance of the product. Chemicals: withdraw the product from service if it
comes into contact with chemical reagents, solvents or fuels which could affect the performance of the product.
STORAGE
Store unpacked in a cool, dry, dark place away from heat sources, high humidity, sharp edges, corrosives or other
possible causes of damage.

ENGLISH

GENERAL INFORMATION

22

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

56-185

Tabla de contenido