Washing Instructions - Össur UNLOADER FIT Instrucciones De Uso

Figure 7: Doffing
• Pull out dial to release and loosen DFS Straps and Calf Strap.
• Remove brace by gently pulling on hinge.
RANGE OF MOTION ADJUSTMENT (ROM)
The device comes with a 0° extension stop installed. Additional extension
stops of 5°, 10°, 15° and 30° have been provided. A flexion stop of 90° is
also included.
Note: If extension stop is modified, DFS strap tension needs to be
adjusted accordingly.
TO CHANGE RANGE OF MOTION
1. Peel condyle pad from hinge to expose screw.
2. Remove retaining screw.
3. Slide 0° stop out of hinge.
4. Insert desired extension stop.
5. Secure with retaining screw (Do not over tighten).
6. To add a flexion stop, follow steps 1 and 2, insert flexion stop, then
follow step 5.

WASHING INSTRUCTIONS

Hand wash using mild soap and rinse thoroughly. For machine wash, use
wash bag and program for delicate wash. Air-dry.
Do not tumble dry nor use bleach
MAINTENANCE
• For safety reasons, hinge should only be disassembled by a certified
practicioner.
• Clean dirt from hinge using tap water and / or compressed air.
• Avoid contact with salt water or chlorinated water, rinse well with
fresh tap water and air dry brace in case it occurs. Regular cleaning
will ensure hinge, sleeve, straps and pads are in optimum
working order.
7