Technoline WL 1040 Manual De Instrucciones página 19

2,000~5,000 ppm
> 5,000 ppm
Declaration of conformity
Hereby, Technotrade declares that this product WL 1040 is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU and ROHS 2011/65/EC. The original EU declaration of
conformity may be found at: www.technoline.de/doc/4029665110400
Specifications
CO
2
Measurement range
Resolution
Accuracy
Warm up time
Temperature range : 0°C to 50°C
Temperature resolution
Relative Humidity range
Relative Humidity range
Operating temperature
Out of range display
CO
2
Temperature
RH%
Power Supply
Default Settings
CO alert
2
RH% alert
drowsiness and poor air. Ventilation
recommended!
Level associated with headaches, sleepiness,
and stagnant, stale, stuffy air. Poor
concentration, loss of attention, increased
heart rate and slight nausea may also be
present. Ventilation strongly recommended!
Exposure may lead to serious oxygen
deprivation resulting in permanent brain
damage, coma, and death. Requires
immediate ventilation!
: 400 – 5000 PPM
: 1 PPM
: +/- 50 PPM (up to 2000 PPM)
: 2.5 minutes
: 1°C
: 20% - 95%
: 1%
: 0°C to 50°C, < 95% RH non-condensing
: 400 (below 400 PPM) / HI (over 5000 PPM)
: LO (below 0°C) / HI (above 50°C)
: 20% (below 20%) / 95% (over 95%)
: 5V DC, 1.5A adaptor
KA0601A-0501200EUS
: Low - 400, High – 2000
: Low – 35%, High – 70%
EN8