Volvo Penta 3886143 Instrucciones De Montaje página 8

6
22139
22140
22539
5. Place riser, bellows, and elbow on manifold and in
exhaust hose on y-pipe.
6. Secure riser to manifold with bolts and washers
removed earlier. For rear hardware, place washers
on mounting surfacer, drop bolts in from above.
Also re-install any components secured with these
bolts or secured to riser.
7. Torque riser bolts to 12–18 ft. lb. (16–24 Nm).
8. Slide exhaust hose upwards until top edge
contacts the step on the elbow.
9. Position hose clamp 1/4 inch (6mm) from each
edge of hose. Position a second clamp 1/4 inch
(6mm) from each of first clamps.
10. Torque hose clamps to 3–6 ft. lb. (4.5–7.5 Nm).
VPA 7745982 05-2006