Kit Assembly - Metra 95-7522B Instrucciones De Instalación

ISO DDIN radio provision
1. Install the (4) included panel clips to the
back of the radio housing.
Note: The factory clips removed in
disassembly can also be used if so
desired.
2. Attach the radio brackets to the radio
housing with (4) #8 x 3/8" Phillips truss
head screws supplied. (Figure A)
3. Slide the radio into the completed
assembly and secure with screws
supplied with the radio. (Figure B)
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or AXXESS. Test the radio for proper
operation.
5. Reassemble the dash in reverse order of
disassembly.

KIT ASSEMBLY

(Figure A) (Figure B)
3
REV. 9/6/2017 INST95-7522B