Battery Operation; Mains Operation - Sanitas SMA 30 Modo De Empleo

2. Preparation

2.1 Battery operation

Before using the appliance for the first time, charge the battery for at least
15 hours. To do this, connect the power unit to the mains supply. After charg-
ing for the first time, charge time is approximately 7 hours. Turn off the ap-
pliance when charging.
Connect the mains adapter cable to the jack on the appliance and plug the
adapter into the wall outlet. The LED indicator shows that the appliance is
charging.
After every charge, you can use the appliance for ~ 0 minutes.
Please note that you can best preserve the life of the rechargeable battery by
avoiding interruption to the charging cycle prematurely, and continuing to
operate the appliance until the battery is discharged.
Ensure that the mains adapter is unplugged from the mains power supply at
the end of the charging time.

2.2 Mains operation

If the battery is empty, the appliance can also be run using the plug-in power
supply. To do this, let the appliance charge with the power unit for approx. 5
minutes; it will then be fully operational again. The appliance should only be
operated with the voltage indicated on the power unit.
2.3 What you should know about the appliance
This manicure and pedicure appliance is equipped with top-quality attach-
ments. It has a cuticle pusher and 7 attachments with a long-life sapphire
coating or polishing felt.
Together with the -level speed control and clockwise / anticlockwise opera-
tion, this ensures a professional pedicure and manicure that would otherwise
only be possible at a podiatrist.
3. Application
3.1 General
– This instrument is intended only for the treatment of hands (manicure) and
feet (pedicure).
– Select an attachment and push it onto the instrument spindle using a
slight pressure. To remove: pull the attachment and instrument apart in the
axial direction (straight).
11