Sanitas SMA 30 Modo De Empleo página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
Please read these instructions for use carefully and keep them for later use,
be sure to make them accessible to other users and observe the information
they contain.
1. important notes
!
Read through these instructions for use carefully before first
use. Keep them to hand for later use and ensure that they
are accessible to other users.
IMPORTANT:
When in use, there may be an intense heat build-up on the skin or nail.
– Check results regularly during treatment. This is particularly advisable in the
case of diabetics, as they are less sensitive to pain and are liable to become
injured more easily. Attachments A, B. C and D that are provided are basically
suitable for diabetics as they are only used for treatment of areas rather than
specific points. Attachments E, F and G are, however, less suitable for diabet-
ics. Always use with extreme care. If in doubt, ask your doctor.
– This instrument must be used only for the purpose for which it has been
developed, and in the manner described in the instructions for use. Any
improper use can be dangerous.
– In case of prolonged intensive use (e.g. milling of dead skin from your feet)
the device might get very hot. In order to prevent skin burns in these situ-
ations, there should be longer breaks between each application. For your
own safety, constantly monitor heat build up in the device. This particularly
applies to people who are insensitive to heat.
– The device is only for private use and is not intended for medical or com-
mercial purposes.
– For reasons of hygiene, the device should only be used on one person.
– The manager is not responsible for damage or injury caused by improper or
incorrect use.
– Ensure before use that there is no visible damage to the instrument and
accessories. In the event of doubt, do not use them and contact your dealer
or the customer service address stated.
english
9

Publicidad

Tabla de contenido
loading

Tabla de contenido