GYS GYSPACK Serie Manual Del Usuario página 9

Translation of the original instructions
• Warning! Always remove the power plug from the wall socket be-
fore carrying out any work on the device.
• The device is maintenance-free.
• If the internal fuse is blown, it must be replaced by the manufacturer,
its after-sales service or an equally qualified person.
• Under no circumstances should solvents or other aggressive cleaning
agents be used.
• Clean the device's surfaces with a soft, dry cloth.
Regulations:
• The device complies with European Directive.
• The certificate of compliance is available on our website.
• EAC conformity mark (Eurasian Economic Commission)
Disposal:
• T his product should be disposed of at an appropriate recycling
facility. Do not dispose of in domestic waste.
• The battery fitted in this device is recyclable. Please proceed ac-
cording to the applicable recycling regulations.
• The battery must be removed from the device before the latter is
discarded.
• The device must absolutely be disconnected from the power sup-
ply network before removing the battery
• Product whose manufacturer is involved in the packaging's recy-
cling process by contributing to a global system of sorting, collec-
ting and recycling of households' packaging waste.
• Recyclable product that falls within waste sorting recommenda-
tions.
GENERAL DESCRIPTION
This autonomous starter is intended for the starting of the vehicles equipped with a 12 V battery. GYSPACK functions
thanks to a battery high performance. For an appropriate use of the machine and a longer life cycle of its internal
battery, it is essential to connect the GYSPACK to the sector and to position the battery on OFF after each use. It is
recommended to leave it connected to the mains until further use.
GYSPACK 650-810 EN
9