English (Original Instructions); Health Hazards - Luna AIWC3/8 TH Traducción De Instrucciones Originales

Pos
.
1. Square drive
2. Trigger
3. Air outlet opening
4. Swivelling air inlet
5. Control for torque/rotation
English
Art. No. 15044-0105
Luna AIWC3/8"TH
Square drive inch
Bolt capacity mm M6-M12
Free speed rpm 8000
Torque (3 steps) Nm
170/240/340
Torque (3 steps) ft-lb
125/175/250
Max. reverse torque Nm
Max. reverse torque ft-lb
Hammer mechanism
type Twin hammer
Sound level dB(A) 93.5
(EN ISO 15744:2002)
Vibration m/s 4.18
2
(ISO 8662-7:1997)
Min. hose size
inch
Air inlet inch
Air consumption at 100% int.*
l/min
Air consumption at 15% int.*
l/min
Air consumption at 100% int.* cmf
Air consumption at 15% int.* cmf
Weight
kg
*At 6.2 bar
1
2
5
3
20734-0209
20734-0100 20750-0109 20793-0108
20273-0107
AIWC1/2"THM AIWC3/4"TH
AIWC1/2"TH
AIWC1/2"TH-S
AIWC1/2"TH-2
3/8 1/2 1/2
M6-M12 M8-M16 M18-M27
8000 6400 5000
170/240/340 325/435/670 620/1040/1400
125/175/250 240/320/495 460/770/1030
360 360 705 1460
265 265 520 1080
Twin hammer Twin hammer Twin hammer
93.5 98.5 99.8
2.3 <4.31 7.21
3/8 3/8 3/8
1/4 1/4 1/4
900 900 1360 1300
135 135 204
15 15 48.0 21.7
2.3 2.3 7.2
1.2 1.2 2.0 3.15
22
Reversible impact wrench. Due to the high torque and reverse torque, very suitable for
use in maintenance and service area. Reverse torque can be set in three various posi-
tions and equipped with quick levers between the tightening and loosening moments
(Pos. 5). 20273-0107 is equipped with extended anvil (Pos.1). Made of composite
material. Pistol type model with air outlet integrated in the handle (Pos. 3). Equipped
with a step less trigger (Pos. 2) as well as swivelling air inlet 360° (Pos. 4) for ease use
of the machine and air hose The grip is made of rubber and integrated into the handle
for higher comfort and nice design which provides isolation against cold air and less
vibrations. The machine i designed to reduce vibrations appearing to its high impact
power. Square drive with ring locking of the impact sockets.
•
User of the tool should always take care of his and other persons' safety. The user
4
must always use personal protective equipment.
•
Wear safety goggles, in order to reduce risk of eye injuries that could be caused by
flying sawdust, dust and sparkles.
20793-0207
•
Inhalation of dust can be harmful to health. Wear a suitable visor or breathing appa-
ratus, when working in a dusty environment.
AIWC1"TH
•
In case of continuous work wear safety gloves protecting against the cold air.
•
In order to avoid eventual aural injuries, always use ear protection when using the
3/4 1
tool.
M22-M33 •
The user must always pay attention to the fact that continuous use of rotating and
5000
impact producing manual tools could result in baneful influence on health caused by
620/1040/1400
the vibration.
460/770/1030
•
Ergonomic load: Work with the tools related to recurrent, monotone movements and
1460
uncomfortable body positions may cause back, scruff, arm, knee and other joint inju-
1080
ries.
Twin hammer
99.8
7.21
1/2 1/2
3/8 3/8
1300
195 195
21.7
3.2 3.2
3.51
Description

Health hazards

23