Lorell LLR60175 Instrucciones De Montaje página 3

STEP 1
Hold one end panel (A) upright and look
for the two tabs protruding inward at the
top of each leg.
Take one side panel (B) and hold it at a
90-degree angle to end panel (A). Side
panel (B) should be positioned so the two
holes located at the far end of each side
panel are at the top.
Insert the two tabs located on the inside
top leg of end panel (A) into the two slots
located at the top of each side panel (B).
Repeat this process with the other end
panel (A) and side panel (B).
When complete the unit should be
connected at all four corners and can now
stand upright on it's own four legs.
However, please use caution as the unit is
not fully assembled at this point and could
be unstable.
LLR60175_030306 Page 2 of 9