Lorell LLR60175 Instrucciones De Montaje página 4

STEP 2
Hold inside bottom panel (C ) with flanges
angled downward toward the floor.
Carefully insert inside bottom panel (C )
into the unit so it rests inside and at the
bottom of end panels (A) and side
panels (B).
Insert and tighten 4 screws into the holes
located on the outside and midway down
each leg. The screws will tighten into
bolts that are pre-attached to the inside of
the shelf flange and will securely hold the
end panels, side panels and inside bottom
tray together.
STEP 3
Hold bottom tray (D) with flanges angled
downward and toward the floor.
Carefully insert bottom tray (D) inside
and toward the bottom of all four legs.
Position bottom tray (D) so it aligns with
the holes at the bottom of each leg.
Insert 4 screws, one at each leg, through
the leg and into bolt that is pre-attached to
the inside of the bottom tray flange.
Tighten each screw to ensure bottom tray
is held firmly in place.
STEP 4
Insert 4 casters into 4 plastic sleeves.
Make sure the casters are completely
inserted into the sleeves. Insert the casters
with sleeves attached into the bottom of
each leg.
STEP 5
The unit is now completely assembled.
Make sure all screws are completely
tightened before using the unit.
LLR60175_030306 Page 3 of 9