Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the HAM982K! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, don't install or use it and contact your dealer.
The HAM982K home alarm set comprises:
1. 1 x electronic siren
2. 1 x AC power adapter
3. 1 x PIR detector
4. 5 x magnetic reed switches
5. 1 x panic button
6. 1 x 8-zone alarm control panel
These numbers refer to the chapters below.
1. Electronic Siren
5" horn speaker
Operating voltage
Peak output power
Current consumption 600mA
Connection diagram:
It is important to know if the N.O. contact is of the positive or the negative type. If it is a positive type, connection
should be made as shown above. If it is a negative type, the switch should be on the black (-) wire.
2. AC Power Adapter
Input voltage
Output voltage
Output current
Rated power factor
Protection
Dimensions (LxWxH) 76 x 89.5 x 62mm
Weight
HAM982K_v2
HAM982K – HOME ALARM STARTER SET
6-12Vdc
7W
230Vac 50Hz
16.5Vac
3000mA max.
cos φ 0.96
built-in thermal & current fuse
1.2kg
+ =red wire
- = black wire
3
VELLEMAN