Safety Instructions - LaserLiner SmartVision-Laser Manual De Instrucciones

Completely read through the operating instructions, the
"Warranty and Additional Information" booklet as well
! as the latest information under the internet link at the
end of these instructions. Follow the instructions they
contain.This document must be kept in a safe place and
if the laser device is passed on, this document must be
passed on with it.
The automatic cross-line laser for aligning tiles,
wall studding, windows, doors etc.
General safety instructions
– The device must only be used in accordance with its
intendedpurpose and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted, this
will otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its
functions fail or the battery charge is weak.

Safety instructions

Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Under no circumstances should optical instruments
(magnifying glass, microscope, binoculars) be used to look
at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst
laser devices are in operation.
– In public areas shield off the laser beam with barriers and
partitions wherever possible and identify the laser area with
warning signs.
08
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm
EN 60825-1:2014